$72.99—$99.99
Easily add a variety of red dot sights to the CZ Shadow 2 pistol or clone, such as the C- More RTS 2, Vortex Venom, Trijicon SRO “specialized reflex optic.” and other conventional red dot sights that share the same mounting footprint.
The multi-optic red dot mount is installed using the existing rear sight dovetail on the CZ pistol removing the need for milling or modifying the original slide]
Features:
Precision machined from mild steel with a PVD protective finish
Serrations on both sides combined with rounded edges enhance grip and comfort when reloading
Notched mark at the back of the mount to assist with centring the scope mount during installation
When the red dot is mounted, the scope will be pitched downward
x8 Locator pins supplied
x2 Grub Screws supplied
x2 M3-0.5 X12 Hex screws & washers are included for the installation of the Red Dot to the plate. Please note: (These screws are only needed for those dots that sit over the M3 tapped holes, and may need shortening by cutting/filing for a perfect fitting. Firstly place the Red dot on the plate and thread the screws all the way through. Then flip over to see how much is sticking out. If any thread is sticking out mark the over-length and cut it off as this needs to be ideally flush. Using a Dremel/File is perfect for accomplishing this.)
Weight: 35g
It fits The Following Pistol:
FIND THE PLATE THAT YOU NEED :SHADOW 1 & SHADOW2
CZ SHADOW 2/SP01 DOVETAIL -VERSION A – 103535
CZ SHADOW 2/SP01 DOVETAIL -VERSION B – 103601
A – Version – Compatible With:
B – Version – Compatible With:
Boss Components recommends 15-inch lbs of torque and a drip of blue Loctite on all grub & mounting screws.
Easily add a variety of red dot sights to the CZ Shadow 2 pistol or clone, such as the C- More RTS 2, Vortex Venom, Trijicon SRO “specialized reflex optic.” and other conventional red dot sights that share the same mounting footprint.
The multi-optic red dot mount is installed using the existing rear sight dovetail on the CZ pistol removing the need for milling or modifying the original slide]
Features:
Precision machined from mild steel with a PVD protective finish
Serrations on both sides combined with rounded edges enhance grip and comfort when reloading
Notched mark at the back of the mount to assist with centring the scope mount during installation
When the red dot is mounted, the scope will be pitched downward
x8 Locator pins supplied
x2 Grub Screws supplied
x2 M3-0.5 X12 Hex screws & washers are included for the installation of the Red Dot to the plate. Please note: (These screws are only needed for those dots that sit over the M3 tapped holes, and may need shortening by cutting/filing for a perfect fitting. Firstly place the Red dot on the plate and thread the screws all the way through. Then flip over to see how much is sticking out. If any thread is sticking out mark the over-length and cut it off as this needs to be ideally flush. Using a Dremel/File is perfect for accomplishing this.)
Weight: 35g
It fits The Following Pistol:
FIND THE PLATE THAT YOU NEED :SHADOW 1 & SHADOW2
CZ SHADOW 2/SP01 DOVETAIL -VERSION A – 103535
CZ SHADOW 2/SP01 DOVETAIL -VERSION B – 103601
A – Version – Compatible With:
B – Version – Compatible With:
Boss Components recommends 15-inch lbs of torque and a drip of blue Loctite on all grub & mounting screws.
Type | Version A, Version B |
---|
Brand:
Boss Components