Accueil   |   Service à la clientèle
English   |   

www.crafm.com

Le centre de tir récréatif et d'entraînement

Machines

Total des articles de 1 à 10 sur 13

par page
Liquidation Promotion Nouveauté
Page :
  1. 1
  2. 2

Grille  Liste 

Par ordre décroissant
  1. DILLON XL 650

    DILLON XL 650

    847,99 $

    749,99 $

    Updated 30/03/2016 - View detail Product Page in FR/EN section En savoir plus
  2. Mark 7 Decapping Sensor for 1050
    Sometimes you decap and sometimes you don't (decapping is the process in Station #2 that pushes out the old primer). What happens when your decapping pin is broken and you don't realize it ? How about that stubborn spent primer that hangs onto the pin and isn't fully discarded only to be pushed back in by the swage station ? oops. This is a must-have accessory for the Mark 7® 1050 Autodrive. The positive decap sensor uses optical recognition to determine if a spent primer is removed and if no spent primer falls the machine stops after the stroke making easy to remove the impacted case. Save yourself and save your machine. If you are processing or loading new brass, simply disable the sensor from the Mark 7® tablet interface. ALSO acts as a brass sensor - when enabled can stop the press when brass is not present in the decapping station. En savoir plus
  3. Dillon Precision D-TERMINATOR ELECTRONIC SCALE
    Specifications 1500 Grain/ 100 Gram Capacity Accurate to 0.1 grain/0.01 gram Uses four AA batteries (included) Comes with its own AC adapter Scale Calibration Weight included Built-in Dust Cover All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase. En savoir plus
  4. DILLON PRECISION 1050/SUPER 1050/SL900 MACHINE COVER
    This heavy-duty nylon cover comes equipped with a D-ring, allowing the zipper to be locked.
    If you have a Mr. Bulletfeeder mounted onto your 1050, this cover will still cover the machine, but you must orient the cover so that the zipper is on the LEFT side, not the back.
    En savoir plus
  5. DILLON PRECISION XL 650 MACHINE COVER
    DILLON PRECISION XL 650 MACHINE COVER
    This packcloth nylon machine cover comes equipped with a D-ring, allowing the heavy-duty zipper to be locked.Covers XL650 with or without the case feeder attached.
    Additionally, use this cover for the RL550 when equipped with the optional handgun caliber case feeder.
    If you have a Mr Bulletfeeder mounted on your XL650, order the 1050 Machine Cover #13239instead.
    En savoir plus
  6. DILLON MARK 7 650 PRO AUTODRIVE

    MARK 7 - 650 PRO AUTODRIVE

    2 560,99 $

    2 527,88 $

    MARK 7 650 PRO AUTODRIVE

    This MARK 7 650 PRO AUTODRIVE is the perfect add on for your machine. It will allow you to do Automatic Reloading in a more easy way, like never before.

    En savoir plus
  7. DILLON MARK 7 - PRIMERSENSE LOW PRIMER ALARM
    MARK 7 - PRIMERSENSE LOW PRIMER ALARM


    The PrimerSense® Low Primer sensor takes the guess work out of your loading operation by alerting you when you are low on primers mechanically. The Mark 7® unit already has a programmable stop due to low primers that you enable from the included computer tablet. Install this mechanical unit and you are double protected from running out of primers and spilling powder all over your shell plate.
    This unit installs in moments with the included hardware and rides underneath Dillon's audible primer sensor. When that unit goes off, PrimerSense® will also be enabled and it stops the machine at the end of the stroke. You will then see a note on the computer tablet to refill your primer tube. A must-have for people that want full protection from running out of primers which can ruin your whole reloading session.

    En savoir plus
  8. DILLON MARK 7 - POWDERSENSE LOW POWDER ALARM
    MARK 7 - POWDERSENSE LOW POWDER ALARM


    The PowderSense® Digital Powder check sensor automatically stops the machine if an incorrect powder level is detected inside the case. You will then see a notification on the computer tablet to check the case powder level. A must-have for people that want full confidence that every round produced has the correct powder level.
    If you are using a Mr.Bulletfeeder use with a combo seating/crimping die. If you have a GSI bulletfeeder the PowderSense® can be used along with standard seating/crimping dies.

    En savoir plus
  9. MARK 7 - SWAGSENSE ELECTRONIC SWAG SYSTEM
    MARK 7 - SWAGSENSE ELECTRONIC SWAG SYSTEM


    The swaging station adds a chamber to the inside of the primer pocket to ensure proper primer seating. If there is an obstruction that prevents the swage rod to enter the primer pocket by either a partially ejected primer often called a "ringer" or a small primer pocket in mixed 45 ACP brass a jam or worse may occur. SWAGESense uses Mark 7® proprietary technology to not only perform a swage operation, but also can detect a ringer and small pocket primers.

    En savoir plus
  10. MARK 7 - OPTICAL DECAPPING SENSOR
    MARK 7 - OPTICAL DECAPPING SENSOR


    This is a must-have accessory for the Mark 7® 650 Autodrive. The positive decap sensor uses optical recognition to determine if a spent primer is removed and if no spent primer falls the machine stops after the stroke making easy to remove the impacted case. Save yourself and save your machine. If you are processing or loading new brass, simply disable the sensor from the Mark 7® tablet interface. ALSO acts as a brass sensor - when enabled can stop the press when brass is not present in the decapping station.

    En savoir plus